|
|
Post by kevkevt on Dec 5, 2012 12:26:08 GMT
Ok i need help. I made the kit as normal this is about my 13th time of making and all is well accept its not clearing? its still black/grey. i put the clearer in waited now 4 days nothing, i did take out some more gas i think it had in it. please advise do i destroy the batch or?  ? |
|
|
|
Post by kevkevt on Dec 5, 2012 18:56:30 GMT
5 views no help?
|
|
|
|
Post by kevkevt on Dec 5, 2012 19:31:59 GMT
plzzzzz
|
|
|
|
Post by lesrands on Dec 6, 2012 13:34:14 GMT
NO. Do not destroy the batch. Rack it off, put in another dose of finings and keep warmer. Should clear. !!!
|
|
|
|
Post by kevkevt on Dec 7, 2012 7:55:15 GMT
Ok thank you doing it today we shall see what happens, also forgot to ask after it comes out the still what do you filter with? someone said to me a brita water filter as the filters you can get from poundland?
Im currantly using the one that come with it but its at end of use and refill expencive
|
|
|
|
Post by stingrayjay on Jun 23, 2013 23:16:02 GMT
If your stilling it ,, dont bother clearing it , i dont with mine , just dont disturb the bottom sediment , siphon it off when it stops fermenting , then distill it :-)
Give still a good rinse out afterwards ,
|
|
|
|
Post by clownroy1944 on Nov 27, 2013 10:24:17 GMT
 Help mine is black as well, and when I try to take reading with alcohol meter get no reading, Did I do it to soon or what, and what can I do to Right it 
|
|
|
|
Post by clownroy1944 on Nov 28, 2013 10:38:56 GMT
All sorted and the Best I've made so far, I just put it in the still and it came out at 70%  |
|
Help mine is black as well, and when I try to take reading with alcohol meter get no reading, Did I do it to soon or what, and what can I do to Right it 
